R.W.FLAME 60 Inch Recessed Electric Fireplace Review
The R.W.FLAME 60 inch electric fireplace is a 3.86 in deep electric heater with a flame look, two heat settings and a 2 x 6 stud fit. It suits a framed wall that needs a thin unit with touch and remote controls.
On this page (12 sections)
- What the R.W.FLAME 60 inch electric fireplace is
- How the 60 inch width and 3.86 in depth fit a wall
- Heat: 750 W, 1,500 W and the zone it covers
- Flame look and controls
- Safety features and certification
- Install notes for a 2 x 6 wall
- Does it need a chimney or a vent?
- Power and safety: plug-in or hard-wired
- Who should buy the R.W.FLAME 60 inch electric fireplace, and who should skip it
- How it compares with the EUHOMY 60 inch unit
- How we scored the R.W.FLAME 60
- Verdict on the R.W.FLAME 60 inch electric fireplace
The R.W.FLAME 60 inch electric fireplace is a 3.86 in deep unit that hangs on a wall or sits in a framed recess, with 750 W and 1,500 W heat settings and touch and remote controls. It suits a wide wall where depth is tight.
This review covers the size, heat, controls, power notes and trade-offs. We compared the maker's specs and claims, so it's research, not a lab test.
What the R.W.FLAME 60 inch electric fireplace is
It's a 60 in wide electric fireplace in a black, polished alloy steel case, sold for wall mounting or a recess. The case is 18.11 in tall and 3.86 in deep, and the unit weighs 47.7 lb.
R.W.FLAME says the new design is 3.86 in thick, down from 6 in on its older model, which trims about 2 in off the depth. It also says it moved the power and cord location.
It sits in the budget to mid-range tier, and R.W.FLAME names the living room as its room type.
The only accessory named is a remote, so the look comes from the LED flame and bed rather than a log set.
How the 60 inch width and 3.86 in depth fit a wall
It fits a wall that's wide and shallow, since it's 60 in across and hangs 3.86 in off the surface. The 18.11 in height shows as a band on the wall, so sketch it next to your TV height.
A 60 in width suits a wide wall, such as one built around a 65 to 75 in TV. Our what size electric fireplace do you need guide helps you set the width.
How the R.W.FLAME 60 inch fireplace fits your wall
Measure the opening's width and height, the cavity depth and the stud size. R.W.FLAME says it fits a 2 x 6 stud, so confirm your framing before you order.
A 2 x 4 wall is about 3.5 in deep, less than the unit's 3.86 in, so check the manual before you try a recess in one. Check the wall for wires and pipes before you cut anything, and never cut into a load-bearing wall.
The how to install a recessed electric fireplace overview covers the framing and cutout basics.
Heat: 750 W, 1,500 W and the zone it covers
The unit has a 750 W setting and a 1,500 W setting, and R.W.FLAME says it heats a zone up to 400 sq ft. That's a claim about zone heat, not a promise for your room.
The 750 W setting draws half the power of the 1,500 W setting. R.W.FLAME also says the heat helps keep the air from getting too dry.
How much heat a 60 inch electric fireplace gives
1,500 W is about 5,100 BTU per hour. That's a real amount of heat for the area around the unit, but it isn't a whole-house heater.
At full heat it uses 1.5 kWh for each hour. Multiply that by your own electric rate to see what an hour costs where you live.
Use it as a supplement for the room you sit in, and keep your main heat on its own controls. For a wider view of the heat question, read do electric fireplaces give off heat.
Flame look and controls
The flame runs in 12 flame and bed color modes, with 5 flame speeds and 5 brightness levels. R.W.FLAME says an automatic setting changes the flame color and brightness on its own.
The speed setting changes how fast the flame moves, and the brightness levels let you dim it for a dark room.
The touch screen and the remote both control the unit, so you can change the flame at the wall if the remote goes missing. The remote includes a timer.
R.W.FLAME calls the unit low noise but gives no decibel number.
Safety features and certification
R.W.FLAME says the unit is ETL approved and has an auto heat-off feature that stops it from overheating. Those are the maker's claims, and the manual's safety rules still apply.
ETL is a safety-testing mark from the Intertek lab. It shows a product was checked against a standard, not that it's free of risk.
Read the manual for how the heat-off feature resets, and don't try to work around it. The unit's warranty length isn't stated, so ask R.W.FLAME before you buy.
Install notes for a 2 x 6 wall
Beyond the stud fit, plan around the weight, the cord route and the outlet position before anything goes on the wall.
At 47.7 lb, plan for a helper and follow the manual's mounting steps. R.W.FLAME moved the cord location in this design, so check the manual for where the cord comes out before you frame the opening or pick an outlet spot.
Write these numbers down before you order:
- The opening: 60 in wide, 18.11 in tall and at least 3.86 in deep.
- The stud size, since R.W.FLAME names 2 x 6.
- The outlet position, and where the cord comes out of the unit.
- The TV's size, and both makers' heat and clearance notes.
- Who can help you lift 47.7 lb.
Does it need a chimney or a vent?
No. It's an electric heater, so there's no flue, smoke or exhaust to vent.
It still needs the clearances in the manual, and it still needs to be powered the way the manual says.
Power and safety: plug-in or hard-wired
It's corded electric. Check the manual to see whether it plugs into an outlet or needs hard-wiring before you plan the wall.
If the unit is hard-wired, or if a new outlet or circuit is needed, use a licensed electrician. Follow the maker's manual for every step from the opening to the power.
The NFPA home fire safety pages cover general home fire safety, including heating equipment.
Don't assume a TV is safe above or beside this heater. Read R.W.FLAME's heat and clearance notes and your TV maker's notes before you hang anything on the wall.
Who should buy the R.W.FLAME 60 inch electric fireplace, and who should skip it
Buy it for a wide wall that takes a 2 x 6 stud and needs a thin unit. It's a match when you want touch and remote controls, a timer and two heat settings.
Skip it if your cavity is shallower than 3.86 in, since a deeper unit won't sit flush. Also skip it if you want a log or crystal bed, a decibel rating or a stated warranty.
It also suits a buyer who is replacing an older, deeper unit and wants a flatter look, and a living room where the flame is the main attraction and the heat is a supplement.
If you need a steady whole-room heater, a different plan is the better choice.
How it compares with the EUHOMY 60 inch unit
The R.W.FLAME is thinner, at 3.86 in deep against 4.13 in for the EUHOMY, but it's heavier at 47.7 lb against 30.8 lb. The EUHOMY adds a glass front, a carbon log and crystal stones, and a 45 dB noise figure.
If 60 in is too wide for your wall, the same maker's 50 in unit is also 3.86 in deep.
Read our EUHOMY 60 inch review to see the other side of the choice. For every 60 inch option in one place, see best 60 inch electric fireplaces.
How we scored the R.W.FLAME 60
It scores 8.9. Our score weighs specs, features and buyer feedback against what you're shopping for.
It earns that for the 3.86 in depth, the 2 x 6 stud fit and the touch and remote controls. It loses a little for the unclear power connection, the 47.7 lb weight and no stated warranty.
R.W.FLAME 60 inch electric fireplace
- 3.86 in deep, 18.11 in tall
- Fits a 2 x 6 stud wall
- 750 W and 1,500 W settings
- Touch screen and remote with timer
- 12 flame and bed color modes, 5 flame speeds
- Auto heat-off feature
- ETL approved, R.W.FLAME says
A 60 inch unit only 3.86 in deep, made for a framed wall where depth is the limit. Touch and remote controls cover the flame, the heat and the timer.
Pros
- 3.86 in deep, down from 6 in on the older model, R.W.FLAME says
- Two heat settings and a timer
- Touch screen and remote with 12 flame and bed color modes
Cons
- Weighs 47.7 lb, so plan for a helper
- No log or crystal bed named in the box
- Corded electric, so check whether it plugs in or is hard-wired
Verdict on the R.W.FLAME 60 inch electric fireplace
Pick it if your wall is framed for a 2 x 6 stud and you want a thin 60 in unit with touch and remote controls. Skip it if your cavity is shallow or you want a log look.
Measure the wall first, then check the heat and clearance notes for both the fireplace and the TV. For the full wall plan, read how to plan a TV wall with an electric fireplace.
For other widths and types, the wall mounted and recessed electric fireplace guide is the place to start. The best wall mounted electric fireplaces roundup lists more units to compare.
Frequently asked questions
Does the R.W.FLAME 60 inch electric fireplace fit a 2 x 6 stud wall?
R.W.FLAME says the unit is made for a 2 x 6 stud wall, so that's the first number to check. Compare your wall's stud size and cavity depth with the unit's 3.86 in depth before you buy, and choose a different model if the cavity is shallower.
What heat settings does the R.W.FLAME 60 offer?
It offers a 750 W lower setting and a 1,500 W heating setting, and you can switch between them. R.W.FLAME says the heat covers up to 400 square feet, which is a zone claim, so treat the unit as a supplement to your main heat.
Does the R.W.FLAME 60 plug in or need hard-wiring?
It's corded electric, so check the manual to see whether it plugs into an outlet or needs hard-wiring. For a hard-wired install, or if a new outlet or circuit is needed, use a licensed electrician as the manual directs, and don't guess.
Can I hang a TV above the R.W.FLAME 60?
Don't assume a TV is safe above or beside the unit. Read R.W.FLAME's heat and clearance notes and your TV maker's notes first, because those notes set the limits for your setup, and ask a pro if the two sets of notes leave you unsure.
